DYNISCO UPR800 Series Instruction Manual
Page | 72
SHUNT CALIBRATION - Group 4
Available:
Always
Upper display:
OFF if shunt calibration is disabled, On if shunt calibration is enabled
Lower display:
SHUNT
Range:
OFF, On
Default value:
On
SHUNT VALUE - Group 4
Available:
Only if SHUNT parameter is on
Upper display:
Shunt value
Lower display:
SHNT.%
Range:
From 40.0 to 100.0%
Default value:
80.0%
PRIMARY INPUT FAIL SAFE - Group 4
Available:
Always
Upper display:
Primary input fail safe condition
Lower display:
PI.IFS
Range:
HI, LO
Default value:
High
SECONDARY INPUT FAIL SAFE - Group 4
Available:
Only if SI.TYP is different than OFF
Upper display:
Secondary input fail safe condition
Lower display:
SI.IFS
Range:
HI, LO
Default value:
High
ALARM 1 HYSTERESIS - Group 4
Available:
Only if A1.LNK is different than OFF
Upper display:
Alarm 1 hysteresis
Lower display:
A1.HYS
Range:
From 0.1 to 10.0% of the selected range
Default value:
1.0%
ALARM 1 RESET MODE - Group 4
Available:
Only if A1.LNK is different than OFF
Upper display:
Selected reset mode for alarm 1
Lower display:
A1.RES
Range:
Auto, LAtCh. Automatic reset, manual reset
Default value:
Auto
ALARM 1 FAILSAFE MODE - Group 4
Available:
Only if A1.LNK is different than OFF
Upper display:
Selected failsafe mode for alarm 1
Lower display:
A1.FSM
Range:
FS, nFS. Failsafe mode, non-failsafe mode
