Dynapac CS1400, Instruction Manual

Page: 59 / 118

Operation
4812162501_F.pdf 2018-04-25
Emergency brake
35
Fig. Control panel
35. Emergency stop
Braking is normally activated using the
forward/reverse lever. The hydrostatic transmission
retards and slows the roller when the lever is moved
towards the neutral position.
A disc brake in each drum motor also acts as
emergency brake when driving, and as a parking
brake when stationary.
To brake, press the emergency stop, hold the
steering wheel firmly, and prepare for a sudden
stop. The brakes are applied and the machine
stops. To brake, press the emergency stop, hold the
steering wheel firmly, and prepare for a sudden
stop. The brakes are applied and the machine
stops.
After braking, return the forward/reverse lever to the
neutral position and pull out the emergency stop knob.
Switching off
17
21
Fig. Control panel
17. Start/stop knob
21. Warning lamps
Check instruments and warning lamps to see if any
faults are indicated. Switch off all lights and other
electrical functions.
Turn the starter switch (17) to off position 0. Lower the
instrument cover (on rollers without cab) and lock it.
49