Dynapac CS1400, Instruction Manual

Page: 82 / 118

Maintenance, 10h
4812162501_F.pdf 2018-04-25
Hydraulic reservoir, Level check - Filling
Fig. Hydraulic reservoir
1. Sight glass
2. Filler cap
1
2
Wipe the sight glass (1) and check that the oil level is
between the upper and lower marks.
If necessary, fill with hydraulic fluid by unscrewing the
filler cap (2). See under the "Lubricants" heading for
the correct oil grade.
Coolant level - Check
4
Fig. Expansion tank
1. Filler cap
2. Max. level
3. Min. level
4. Level sensor
1
2
3
Place the roller on a flat surface and check that the
level of the coolant is between max./min. in the sight
glass (2) and (3).
Top up with coolant if the level is too low.
Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles. Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles.
Fill with a mixture of 50% water and 50% anti freeze.
See the lubrication specifications in these instructions
and in the engine manual.
Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed. Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed.
72