Dynapac CS1400, Instruction Manual

Page: 73 / 118

Maintenance - Lubricants and symbols
4812162501_F.pdf 2018-04-25
Maintenance - Lubricants and symbols
Always use high-quality lubricants and the
amounts recommended. Too much grease or
oil can cause overheating, resulting in rapid
wear. Always use high-quality lubricants and the
amounts recommended. Too much grease or
oil can cause overheating, resulting in rapid
wear.
Fluid volumes Fluid volumes
Hydraulic reservoir 100 liters 26.4 gal Hydraulic reservoir 100 liters 26.4 gal
Diesel engine Diesel engine
- Lubricating oil incl.
replacement of oil filter 8,6 liters 9.1 qts - Lubricating oil incl.
replacement of oil filter 8,6 liters 9.1 qts
- Coolant 19 liter 5 gal - Coolant 19 liter 5 gal
Drum Drum
- Ballast front 2x470 liters 2x124 gal - Ballast front 2x470 liters 2x124 gal
- Ballast rear 1130 liter 298.3 gal - Ballast rear 1130 liter 298.3 gal
Other fuel and lubricants are required when
operating in areas with extremely high or
extremely low ambient temperatures. See the
‘Special instructions’ chapter, or consult
Dynapac. Other fuel and lubricants are required when
operating in areas with extremely high or
extremely low ambient temperatures. See the
‘Special instructions’ chapter, or consult
Dynapac.
ENGINE OIL Air temperature -15°C - +50°C
(5°F-122°F) Dynapac Engine oil 200 P/N 4812161855 (5 liter),
P/N 4812161856 (20 liter),
P/N 4812161857 (209 liter) ENGINE OIL Air temperature -15°C - +50°C
(5°F-122°F) Dynapac Engine oil 200 P/N 4812161855 (5 liter),
P/N 4812161856 (20 liter),
P/N 4812161857 (209 liter)
HYDRAULIC FLUID Air temperature -15°C - +50°C
(5°F-122°F) Dynapac Hydraulic 300 P/N 4812161868 (20 liter),
P/N 4812161869 (209 liter) HYDRAULIC FLUID Air temperature -15°C - +50°C
(5°F-122°F) Dynapac Hydraulic 300 P/N 4812161868 (20 liter),
P/N 4812161869 (209 liter)
Air temperature over +50°C
(122°F) Shell Tellus S2 V100 Air temperature over +50°C
(122°F) Shell Tellus S2 V100
BIOLOGICAL
HYDRAULIC FLUID,
PANOLIN When it leaves the factory, the
machine may be filled with
biologically degradable fluid.
The same type of fluid must be
used when changing or topping
up. PANOLIN HLP Synth 46
(www.panolin.com) BIOLOGICAL
HYDRAULIC FLUID,
PANOLIN When it leaves the factory, the
machine may be filled with
biologically degradable fluid.
The same type of fluid must be
used when changing or topping
up. PANOLIN HLP Synth 46
(www.panolin.com)
GREASE for the articulated joint. Dynapac Roller Grease
(0.4kg),
P/N 4812030096
GREASE for the articulated joint. Dynapac Roller Grease
(0.4kg),
P/N 4812030096
Shell Retinax LX2 for
other grease points. Shell Retinax LX2 for
other grease points.
FUEL See engine manual. - - FUEL See engine manual. - -
COOLANT Anti-freeze protection down to
about -37°C (-34.6°F) GlycoShell/Carcoolant
774C (mixed 50/50 with
water) COOLANT Anti-freeze protection down to
about -37°C (-34.6°F) GlycoShell/Carcoolant
774C (mixed 50/50 with
water)
63