Dynapac CS1400, Instruction Manual

Page: 54 / 118

Operation
4812162501_F.pdf 2018-04-25
Driving
Operating the roller
12
17
18
20
Fig. Starting controls
12. Parking brake knob
17. Start/stop knob
18. Sprinkler switch
20. Gear selector
Always drive with engine revs higher than 1500
rpm. Always drive with engine revs higher than 1500
rpm.
Increase engine speed to 2200 rpm for maximum
driving speed.
When changing the operator seat the interlock
must be changed to suit the new seat via the
switch. When changing the operator seat the interlock
must be changed to suit the new seat via the
switch.
Check that the steering is working correctly by turning
the steering wheel once to the right and once to the
left while the roller is stationary.
Make sure that the area in front of and behind the
roller is clear. Make sure that the area in front of and behind the
roller is clear.
Set the parking brake knob (12) to the left and
check that the warning lamp for the parking brake
is now off. Note that the roller can start to roll if it
is standing on a slope. Set the parking brake knob (12) to the left and
check that the warning lamp for the parking brake
is now off. Note that the roller can start to roll if it
is standing on a slope.
44