Dynapac CS1400, Instruction Manual

Page: 115 / 118

Maintenance - 2000h
4812162501_F.pdf 2018-04-25
Compressor - Check (Optional)
Fig. Engine compartment
1. Compressor
2. Drive belt
1
2
Inspect the attachment of the compressor (1).
The compressor is located below the air filter in the
engine compartment.
The unit should, if possible, be run at least five
minutes every week to ensure the lubrication of the
gaskets and compressor in the system.
Check the drive belt (2) for any physical damage or
cracks.
The air conditioning unit should not be run when
the outdoor temperature is below 0 C, other than
for the above. The air conditioning unit should not be run when
the outdoor temperature is below 0 C, other than
for the above.
Air conditioning (Optional)
Drying filter - Inspection
With the unit in operation, check using the sight glass
(1) that bubbles are not visible on the drying filter.
3
Fig. Drying filter
1. Sight glass
2. Filter holder
1
2
Never work under the roller when the engine is
running. Park the roller on a level surface, chock
the drum and activate the parking brake. Never work under the roller when the engine is
running. Park the roller on a level surface, chock
the drum and activate the parking brake.
he filter is located inside the box placed under the
seats, close to the left of the right seat. The hole in the
box is covered with a rubber cover. See the illustration.
If bubbles are visible in the sight glass, this indicates
that the refrigerant level is too low. Shut off the unit, as
it can be damaged if it is run with insufficient
refrigerant. Fill with refrigerant.
Check the moisture indicator (3). It should be blue. If it
is beige, the dryer cartridge should be changed by an
authorized service company.
The refrigerant circuit is only to be worked on by
authorized companies. The refrigerant circuit is only to be worked on by
authorized companies.
105