Dynapac CS1400, Instruction Manual

Page: 58 / 118

Operation
4812162501_F.pdf 2018-04-25
Braking
Normal braking
2
Fig. Control panel
2. Rev control in neutral
Forward
Reverse
Move the forward/reverse lever (2) to neutral to stop
the roller.
Always activate the parking brake, even for short stops
on sloping ground.
3
Fig. Rev control
3. Rev control
Set speed control (3) in idling position (900 rpm). Allow
the engine to idle for a few minutes to cool down.
Switch off the machine with the key.
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature. When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
48