Dynapac CS1400, Instruction Manual

Page: 63 / 118

Miscellaneous
4812162501_F.pdf 2018-04-25
Miscellaneous
Lifting
Locking the articulation
2
4
3
Fig. Articulation in interlocked mode
2. Locking pin
3. Locking arm
4. Locking lug
Articulation must be locked to prevent inadvertent
turning before lifting the roller. Articulation must be locked to prevent inadvertent
turning before lifting the roller.
Turn the steering wheel to the straight ahead position.
Push in the emergency/parking brake knob.
Pull up the locking pin (2), provided with wire.
Fold out the locking arm (3) and secure it to the upper
locking lug (4) on the rear machine frame.
Insert the locking pin through the holes in the locking
arm and locking lug.
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature. When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
Lifting the roller
Weight: refer to the hoisting plate on
the roller
1
2
Fig. Roller prepared for lifting
1. Articulation lock
2. Lifting plate
The machine's gross weight is specified on the
hoisting plate (1). Refer also to the Technical
specifications. The machine's gross weight is specified on the
hoisting plate (1). Refer also to the Technical
specifications.
Lifting gear such as chains, steel wires, straps,
and lifting hooks must conform with current
regulations. Lifting gear such as chains, steel wires, straps,
and lifting hooks must conform with current
regulations.
Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured. Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured.
53