Dynapac CS1400, Instruction Manual

Page: 91 / 118

Maintenance - 50h
4812162501_F.pdf 2018-04-25
Air conditioning (Optional)
- Inspection
Never work under the roller when the engine is
running. Park the roller on a level surface, chock
the wheels and depress the parking brake control. Never work under the roller when the engine is
running. Park the roller on a level surface, chock
the wheels and depress the parking brake control.
Fig. Drying filter
1. Sight glass
2. Filter holder
1
2
With the unit in operation, check using the sight glass
(1) that bubbles are not visible on the drying filter.
The filter is located inside the box placed under the
seats, close to the left of the right seat. The hole in the
box is covered with a rubber cover. See the
illustration.
If bubbles are visible through the sight glass, this
indicates that the refrigerant level is too low. Shut off
the unit, as it can be damaged if it is run with
insufficient refrigerant. Fill with refrigerant.
Air conditioning (Optional)
- Cleaning
Fig. Cab
1. Condensor element
1
If there is a signifcant loss of cooling capacity, clean
the condensor element (1) on the rear edge of the cab.
Also clean the cooling unit in the cab.
81