Dynapac CS1400, Instruction Manual

Page: 31 / 118

Machine description
4812162501_F.pdf 2018-04-25
Machine description
Diesel engine
The machine is equipped with a water-cooled, straight
three cylinder, four-stroke, turbocharged diesel engine.
Propulsion system/Transmission
The propulsion system is a hydrostatic system with a
hydraulic pump supplying oil to three driver motors
connected in parallel. Each motor drives one drum.
The speed of the machine is proportional to the
deflection/angle of the control lever from neutral.
Brake system
The brake system consists of a service brake,
secondary brake and parking brake.
The service brake is hydrostatisc and is activated by
moving the control lever to neutral.
Secondary/Parking brake
The secondary and parking brake system consists of
sprung multiple disc brakes in the motors. The brakes
are released with hydraulic pressure and are operated
with a switch on the instrument panel.
Steering system
The steering system is a hydrostatic system.
The control value on the steering column distributes
the flow to the control cylinder, which actuates the
articulation.
The steering angle is proportional to the deflection of
the steering wheel.
FOPS and ROPS
FOPS is the abbreviation for "Falling Object Protective
Structure" (roof protection) and ROPS is the
abbreviation for "Roll Over Protective Structure".
If any part of the cab's or the FOPS/ROPS structure's
protective construction displays plastic deformation or
cracks, the cab or the FOPS/ROPS structure must be
replaced immediately.
Never perform any modifications on the cab or
FOPS/ROPS structure without first having discussed
the modification with Dynapac's production unit.
Dynapac determines whether the modification could
result in the approval according to the FOPS/ROPS
standards becoming invalid.
21