Dynapac CA250 i, Instruction Manual

Page: 64 / 93

Maintenance - Maintenance schedule
ICA250i-IN2EN1.pdf 2012-12-19
Every 1000 hours of operation (Every six
months)
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
7 Change the hydraulic fluid filter 7 Change the hydraulic fluid filter
8 Drain the condensate from hydraulic reservoir 8 Drain the condensate from hydraulic reservoir
24 Drain condensate from fuel tank 24 Drain condensate from fuel tank
21 Change oil in rear axle differential 21 Change oil in rear axle differential
22 Change oil in the rear axle planetary gearing 22 Change oil in the rear axle planetary gearing
Check engine valve clearances Refer to the engine manual Check engine valve clearances Refer to the engine manual
31 Check belt tension for drive system Refer to the engine manual 31 Check belt tension for drive system Refer to the engine manual
Every 2000 hours of operation (Yearly)
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
8, 9 Change the hydraulic fluid 8, 9 Change the hydraulic fluid
11 Change the oil in the drum 11 Change the oil in the drum
32 Lubricate the Forward/Reverse lever 32 Lubricate the Forward/Reverse lever
56