Dynapac CA250 i, Instruction Manual

Page: 82 / 93

Maintenance - 500h
ICA250i-IN2EN1.pdf 2012-12-19
Diesel engine - Oil and Filter change
Fig. Left side of engine
1. Drain plug
2. Oil filter
1
2
Take great care when draining warm fluid and oil.
Wear protective gloves and goggles. Take great care when draining warm fluid and oil.
Wear protective gloves and goggles.
The oil drain plug (1) is most easily accessible from
the bottom of the engine and is located attached to a
hose on the rear axle.. Drain the oil when the engine is
warm. Place a receptacle that holds at least 15 liters
(4 gal) under the drain plug.
Replace the engine oil filter (2) at the same time. Refer
to the engine manual.
Deliver the drained oil and filter to
environmentally correct handling. Deliver the drained oil and filter to
environmentally correct handling.
74