Dynapac CA250 i, Instruction Manual

Page: 63 / 93

Maintenance - Maintenance schedule
ICA250i-IN2EN1.pdf 2012-12-19
Every 50 hours of operation (Weekly)
Refer to the contents to find the page number of the
sections referred to!
Pos. in fig Action Comment Pos. in fig Action Comment
Check that hoses and couplings are not leaking Check that hoses and couplings are not leaking
4 Inspect/clean the filter element in the air cleaner Replace as required 4 Inspect/clean the filter element in the air cleaner Replace as required
16 Lubricate the articulation 16 Lubricate the articulation
17 Check that the guiding cylinders are tight 17 Check that the guiding cylinders are tight
19 Check the wheel-nuts are tightened 19 Check the wheel-nuts are tightened
20 Check the tire pressure 20 Check the tire pressure
Every 250 hours of operation (Monthly)
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
22 Check oil level in rear axle/planetary gearing 22 Check oil level in rear axle/planetary gearing
14 Check oil level in the drum 14 Check oil level in the drum
30 Clean the coolers 30 Clean the coolers
19 Check the bolted joints The above applies to new
or reconditioned
components only 19 Check the bolted joints The above applies to new
or reconditioned
components only
15 Check rubber elements and bolted joints 15 Check rubber elements and bolted joints
28 Check battery 28 Check battery
Every 500 hours of operation (Every three
months)
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
2 Replace the fuel filter, mud filter Refer to the engine manual 2 Replace the fuel filter, mud filter Refer to the engine manual
6 Check bleeder filter on hydraulic reservoir 6 Check bleeder filter on hydraulic reservoir
3,23 Change the engine oil and oil filter Refer to the engine 3,23 Change the engine oil and oil filter Refer to the engine
55