Dynapac CA250 i, Instruction Manual

Page: 51 / 93

Miscellaneous
ICA250i-IN2EN1.pdf 2012-12-19
Alternative 2
Towing short distances when the engine is
inoperative
First release both towing valves as per alternative 1.
Chock the drums to prevent the roller from moving
when the brakes are mechanically disengaged. Chock the drums to prevent the roller from moving
when the brakes are mechanically disengaged.
Rear axle brake
Fig. Rear axle
1. Lock screw
2. Loch nut
3. Brake release screw
On both sides remove the lock screws (1)
Screw in the brake release bolts (3), 1/2 turn at a time,
in sequence (A, B, C) until the torque drops off sharply
(4-5 turns).
Clear the area of any personnel before removing the
stop blocks on the drum and two wheels, and then tow
the machine to a safe location.
43