Dynapac CA250 i, Instruction Manual

Page: 43 / 93

Operation
ICA250i-IN2EN1.pdf 2012-12-19
Vibration
Vibration On/Off
20
Fig. Instrument panel
20. Vibration switch.
Activation/deactivation of the vibration is selected with
the switch (20).
The operator must activate the vibration via the switch
(4) on the underside of the forward/reverse handle.
See illustration below.
Vibration - Activation
4
Fig. Forward/Reverse lever
4. Switch, vibration On/Off
Never activate vibration when the roller is
stationary. This can damage both the surface and
the machine. Never activate vibration when the roller is
stationary. This can damage both the surface and
the machine.
Engage and disengage vibration using the switch (4)
on the underside of the forward/reverse lever.
Vibration can only be engaged at low and high speed.
Always switch off vibration before the roller comes to a
standstill.
35