Dynapac CA250 i, Instruction Manual

Page: 81 / 93

Maintenance - 500h
ICA250i-IN2EN1.pdf 2012-12-19
Maintenance - 500h
Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified. Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified.
Ensue that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning. Ensue that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Bleeder filter - Inspection/Cleaning
Fig. Hydraulic reservoir
2. Filler cap/Air filter
3. Sight glass
3
2
If passage in either direction is blocked, clean the filter
with a little diesel oil and blow through with
compressed air until the block is removed, or replace
the cap with a new one.
Always wear protective goggles when working with
compressed air. Always wear protective goggles when working with
compressed air.
Check that the bleeder filter (2) is not clogged. Air
should be able to pass through the cap unobstructed
in both directions.
Start the engine and check that there is no leakage of
hydraulic fluid from the filter. Check level of fluid in the
sight glass (3) and top up as required.
73