Dynapac CA250 i, Instruction Manual

Page: 76 / 93

Maintenance - 250h
ICA250i-IN2EN1.pdf 2012-12-19
Rear axle transmission box - Check oil level
Fig. Level check - transmission box
5. Level/Filler plug
6. Drain plug
Never work under the roller when the engine is
running. Park on a level surface. Block the wheels
securely. Never work under the roller when the engine is
running. Park on a level surface. Block the wheels
securely.
Wipe clean and remove the level plug (5) and check
that the oil level reaches the lower edge of the plug
hole. Top up with oil to the right level if the level is low.
Use transmission oil, see lubricant specification.
Clean and refit the plug.
Rear axle planetary gears - Check oil level
Fig. Level check - planetary gear, std
4. Level/Filler plug
Position the roller with the plug in the planetary gear
(4) in the "3 o'clock" position.
Wipe clean and remove the level plug (4) and check
that the oil level reaches the lower edge of the plug
hole. Top off with oil to the right level if the level is low.
Use transmission oil. See lubrication specification.
Clean and refit the plug.
Check the fluid level in the same way on the rear
axle's other planetary gear.
68