Dynapac CA250 i, Instruction Manual

Page: 67 / 93

Maintenance, 10h
ICA250i-IN2EN1.pdf 2012-12-19
Coolant level - Check
Cooling liquid holder is placed up beside the hydraulic
oil tank and is seen easiest from the right side of the
roller.
The filler cap (2) is accessible from the top of the
engine hood.
Fig. Coolant container
1. Level mark in coolant container
(min/max markings)
2. Filler cap
1 2
Check the coolant level with the engine stopped and
cold.
Check that the coolant level is between the max/min
markings (1).
Make sure that cooling air flows freely through the
protective grille to the engine.
The coolant is hot and under pressure at
working temperature and the escaping steam
can cause serious scalding. Open the filler cap
carefully to release the pressure. Wear
protective goggles and protective gloves. The coolant is hot and under pressure at
working temperature and the escaping steam
can cause serious scalding. Open the filler cap
carefully to release the pressure. Wear
protective goggles and protective gloves.
Fill with a mixture of 50% water and 50% antifreeze.
See instructions for lubricant and symbols.
59