Dynapac CA250 i, Instruction Manual

Page: 39 / 93

Operation
ICA250i-IN2EN1.pdf 2012-12-19
Operator position
1
3
2
4
Fig. Operator's station
1. Seat belt
2. ROPS
3. Rubber element
4. Anti-slip
If a ROPS (2) (Roll Over Protective Structure) or a cab
is fitted to the roller, always wear the seat belt (1)
provided and wear a protective helmet.
Replace the seat belt (1) if it shows signs of
wear or has been subjected to high levels of
force. Replace the seat belt (1) if it shows signs of
wear or has been subjected to high levels of
force.
Check that rubber elements (3) on the platform
are intact. Worn elements will impair comfort. Check that rubber elements (3) on the platform
are intact. Worn elements will impair comfort.
Ensure that the anti-slip (4) on the platform is in
good condition. Replace where anti-slip friction is
poor. Ensure that the anti-slip (4) on the platform is in
good condition. Replace where anti-slip friction is
poor.
If the machine is fitted with a cab, make sure that
the door is closed when in motion. If the machine is fitted with a cab, make sure that
the door is closed when in motion.
View
Fig. view
Before starting, make sure that the view forwards and
backwards is unobstructed.
All cab windows should be clean and the rear view
mirrors should be correctly adjusted.
31