Dynapac CA250 i, Instruction Manual

Page: 38 / 93

Operation
ICA250i-IN2EN1.pdf 2012-12-19
1
2
3
4
Fig. Driver seat
1. Lock lever - Length adjustment
2. Weight adjustment
3. Back support angle
4. Seat belt
Driver seat (Option)- Adjustment
Adjust the operator’s seat so that the position is
comfortable and so that the controls are within easy
reach.
The seat can be adjusted as follows.
- Length adjustment (1)
- Weight adjustment (2)
- Back support angle (3)
Always make sure that the seat is secure before
beginning operation. Always make sure that the seat is secure before
beginning operation.
Do not forget to use the seat belt (4). Do not forget to use the seat belt (4).
Instruments and lamps - Checking
2
22
1
Fig. Instrument panel
1. Starter switch
2. Emergency stop
22. Warning panel
Make sure that the emergency stop (2) is pulled
out. When the roller is in neutral or there is no load
on the operator seat, the automatic brake function
is engaged. Make sure that the emergency stop (2) is pulled
out. When the roller is in neutral or there is no load
on the operator seat, the automatic brake function
is engaged.
Pull out the emergency stop (2).
Turn the switch (1) to position 3a.
Check that the warning lamps in the warning panel
(22) come on.
30