Mounting a dismantling tool on the burner head
dreizler A 3001 E - 18.12.2015 | A 2034 - 2.15 | EN - 18.05.2015
86
27 Mounting a dismantling tool on the burner head
WARNING!
The disassembly of the burner head must be made by means of a dismantling tool.
Due to the high weight of burner heads for the burner model series
•
Monobloc M/MC 10001.1 to 10001.4
•
Duobloc M/MC 10003.1 to 10003.5
a dismantling tool is required. A dismantling tool is included in the scope of delivery of each system.
27.1 Dismantling tool for Monobloc burner M/MC 10001:
CAUTION!
Prior to any maintenance or service work, the gas ball tap at the burner supply line must be closed.
Block off the burner downstream of the power supply. (Even with the mains power switch in OFF posi-
tion, the burner power supply line remains live!)
Swivel away the fan housing.
Dock the dismantling tool and the intermediate piece, and tighten all screws.
(The burner head might otherwise jump the rail.)
Insert a safety stop on the rail.
Loosen the burner head screw.
Drive the burner head back and out.
Check the condition and proper seating of the gasket on the gas connection of the burner head during
installation.
Fig. 27-1 Example dismantling tool for Monobloc burner M/MC 10001.1 up to 10001.4
