Basic configuration of burner controller RWF 55
dreizler A 3001 E - 18.12.2015 | A 2076 - 1.13 | EN - 24.10.2013
152
48 Basic configuration of burner controller RWF 55
Fig. 48-1 Universal controller RWF 55
48.1 Configuring the controller with a temperature sensor
48.1.1 Changing the set point (user level) OPR, based on the standard display
Changing setpoint SP 1
From the basic display press button
ENTER
,
so that OPr appears.
Press button
ENTER
so that SP 1 appears.
Press button
ENTER
and SP 1 is flashes.
Press
▲
or
▼
to adjust the required setpoint and press button
ENTER
to confirm.
Timeout
Timeout after about 180 seconds.
NOTICE:
If the setpoint is not stored, the basic display changes after the timeout
tout
and the former setpoint is main-
tained. The value changes only within the permitted range.
Return to standard display by pressing button ESC two times.
48.1.2 Change parameter (parameter level), based on standard display
From the basic display press button
ENTER
so that OPr appears.
Press button
▼
so that PArA appears.
