Mounting a dismantling tool on the burner head
dreizler A 3001 E - 18.12.2015 | A 2034 - 2.15 | EN - 18.05.2015
88
Loosen upper burner head locking screw and carefully lift the burner head out of the burner housing
frame.
Unplug slowly the burner head backwards from the guide screw in the flame tube and let it off to the
header vail.
Fig. 27-3 Auxiliary assembly lever
27.4 Dismantling tool for Duobloc burner M/MC 10003:
WARNING!
The disassembly of the burner head must be made by means of a dismantling tool.
CAUTION!
Prior to any maintenance or service work, the gas ball tap at the burner supply line must be closed.
Block off the burner downstream of the power supply. (Even with the main power switch in OFF position,
the burner power supply line remains live!)
Remove the back cover.
Dock the dismantling tool and the intermediate piece, and tighten all screws.
(The burner head might otherwise jump the rail.)
Insert a safety stop on the rail.
Loosen the burner head screw.
Drive the burner head back and out.
Check the condition and proper seating of the gasket on the gas connection of the burner head during
installation.
