Mounting a dismantling tool on the burner head
dreizler A 3001 E - 18.12.2015 | A 2034 - 2.15 | EN - 18.05.2015
87
1
Burner M/MC 10001.1 up to 10001.4
2
Safety stop (2x)
3
Rail pipe
4
Adjustable support 1.50 - 2.70m, covering at least 300 mm
5
Locking screw
6
Plate locking of the adjustable support
7
7.1 Burner head when properly installed
7.2 Burner head in the extended state
8
Burner head gasket
9
Strapping bushing
10 Warning plate dismantling tool
CAUTION!
Risk of CO-formation and unilateral flame:
The burner head must be checked on centered and tightly closing seat when installed (see 7.1).
The burner head gasket is a wearing part and should be renewed annually during maintenance.
27.2 Setting of height adjustable support of the dismantling tool
On first commissioning of the burner the height adjustable support must be drilled form-fitting by the
locking screw M8 and must be secured with screw and locknut. A clamp is not enough.
Fig. 27-2 Detail drawing of dismantling tool - drilling of the adjustable support
1
Ø 8,4 drill on site
2
Hex bolt DIN 931 - M8x55
3
Plate DIN 125 - B8,4
4
Hex nut DIN 934 - M8
5
Plate DIN 125 - B8,4
27.3 Assembly of the flame tube ring head ø 500
(Burner types M/MC 10001.1 up to 10003.5 in version ARZ or ARZsuper.)
For assembly of the ring heads use the attached auxiliary assembly lever formed as a 3/4" tube.
Fig. 27-3 "Auxiliary assembly lever"
Screw auxiliary assembly lever.
