86 | Dome CXtra
To perform a custom calibration
1 If you have one of the display models listed on the configuration
dialog, follow instructions provided with the display to verify that
the contrast is set properly. This sample table shows the contrast
percentage for a set of the display models.
2 If the Privilege service has been installed, log on as a privileged
user. (See page 138.)
3 Open the CXtra Services menu. Select DICal Calibration >
Calibration Wizard.
4 Follow the instructions for using the photometer in each
Calibration Wizard window and click Next.
NOTE: Abort the calibration at any time by pressing Ctrl+C.
5 If necessary, verify that your display calibration conforms to
the DICOM standard. (See page 88 for instructions.)
NOTE: If you change panel brightness using the brightness control
on the display, you must repeat the preceding calibration steps.
Display Model
Contrast
Desktop PX1910M (2007 or later)
60%
GX2MP
70%
GX2MP (JUN 2007 and later)
70%
GX2MP (JAN 2010 and later)
70%
GX2MP (FEB 2011 and later)
70%
GX2MP (SEPT 2011 and later)
70%
GX2MP Plus (NOV 2011 and later)
70%