130 | Dome CXtra
To set up entries on the Configuration tab
1 Open the Configuration tab to view and modify default evaluations
for each test listed.
You can replace the defaults for any test with any combination of
listed evaluations. The number sequence following each evaluation
name is the paragraph number that describes the evaluation in the
TG18 document.
2 Select a test in the Select Test to Configure list. During an initial
setup, the system automatically selects recommended evaluations
for a test by checking in the selection box next to each evaluation
name. If the test was redefined during previous setup activity, the
system shows the evaluations currently selected.
• Add or delete an evaluation by toggling a check mark in or out of
the selection box.
