DICal Service | 83
Using DICOM Response Function as Default Calibration
Open the DICal Panel Configuration dialog to the Configuration tab.
To activate DICOM grayscale calibration at each system startup, click
the check box for DICOM response function.
The default DICOM calibration is applied to your display settings
whenever you select Desktop DICOM Calibration from the services
menu. No other steps are needed to apply the DICOM calibration
after installation.
To apply the original calibration each time you start the system,
leave the box unchecked.
To apply another response function, choose from the options on the
Calibration tab. See “Choosing Display Calibration” on page 84.
NOTE: For proper display calibration, you must configure the DICal
service after installation. See page 82.
