manualshive.com logo in svg

Dome CXtra, User Manual

Share
Download
Dome CXtra User Manual Download Page 13

Getting Started   |   9

UPGRADE INSTALLATION: To upgrade to package 6.0.1 or later, insert 
the installation CD and run setup.exe. Follow the wizard instructions 
to complete the installation. Services that have been modified since 
the previous release are upgraded.

The application starts when the installation is finished. The Dome 
CXtra icon appears on the Windows taskbar. The check mark indicates 
that the application is running successfully.

 Installing or Removing Services

You can add a service individually if you do not install it during the 
initial installation. You can also delete a single service as necessary.

To install or remove an individual service

1 Log onto Windows with administrator privileges.

2 Insert the installation CD and run setup.exe.

3 Follow the wizard instructions to the Modify, Repair, or 

Remove dialog.

4 Select and deselect the service to be installed or removed.

5 Follow the wizard instructions to complete the installation or 

remove the service.

Summary of Contents for CXtra









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands