manualshive.com logo in svg

Dome CXtra, User Manual

Share
Download
Dome CXtra User Manual Download Page 6

2   |   Dome CXtra

Expansion of Manual Conformance Testing

With the addition of the front sensor on some models of Dome 
displays, the Manual Conformance functionality has been bifurcated 
into the External Sensor Conformance testing (using the photometer 
device) and the Front Sensor Conformance testing.

External Sensor Conformance replaces Manual Conformance on the 
CXtra Services menu and the Conformance wizard. All operational 
procedures are unchanged. 

Front Sensor Conformance has been added to the menu. With this 
functionality you can perform auto and manual conformance testing. 
NOTE: Applies to Dome S3, Dome S3c, and Dome S10 displays only.

White Level Maximum Limit Exceedance

If you have a requirement to exceed the maximum limit of the preset 
White Level target range, you can now do so but your display 
warranty becomes void. Contact NDSsi Customer Care for more 
information.

European Reference Guidelines

The EUREF guidelines, organized by the European Reference 
Organization for Quality Assured Breast Screening and Diagnostic 
Services, promotes mammography care of high quality in European 
Union member states. Users of Dome displays qualified for AAPM 
TG18 can perform the White Level Calibration procedure to meet this 
standard. See “White Level Calibration Service” on page 44.

Modification of Color Calibration Setting

Only an administrator, not privileged users, can modify the color 
calibration setting accessible on the RightLight Panel Configuration 
dialog, Color tab. (See page 22.) 

NOTE: Applies only to Dome displays using the RightLight 
functionality.

Summary of Contents for CXtra









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands