manualshive.com logo in svg

Dome CXtra, User Manual

Share
Download
Dome CXtra User Manual Download Page 111

Test Patterns Service   |   107

When Random pattern location is used by default or choice, you see 
the pattern in a random location each time the test is invoked. 

These six patterns are supported by the Dome Visual Test:

When Random pattern type is used by default or choice, you see 
a randomly selected pattern each time the test is invoked. 

Open this tab to configure these three parameters:

• Prompt for Tester name: Enter your name after test completion. If 

this option is disabled, the software labels the user “Anonymous.”

• View failed test as warning: Set the message box to report test 

failure as a warning dialog or an information dialog.

• Minutes to wait for Later option: Configure the time in minutes for 

the test to reappear. This function is active when you select the 
Later option in the Preparing to Show dialog.

• SMPTE

• TG18-GV

• TG18-QC

• DIN-1

• TG18-CT  • DIN-2

Summary of Contents for CXtra









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands