Dodge Journey 2011 Owner'S Manual Download Page 81

Page: 81 / 559

NOTE:

The second row bench with Integrated Child

Booster Seat must remain in the full rear position during
use.

2. Pull the release loop forward to release the latch and
seat cushion.

3. Lift the seat cushion up and push back to lock it in the
booster seat position.

4. Place the child upright in the seat with their back
firmly against the seatback.

5. Grasp the latch plate and pull out the seat belt.

Release Loop

Booster Seat

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Journey 2011
















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Journey 2011

Reviews:

Related manuals for Journey 2011

Brands by name

Popular brands

Dodge Journey 2011, Owner'S Manual

Search results

Summary of Contents for Journey 2011

Reviews:

Related manuals for Journey 2011

Brands by name

Popular brands