Dodge Journey 2011 Owner'S Manual Download Page 142

Page: 142 / 559

•

The Options pop up will display, touch Remove from
Favs.

Emergency And Towing Assistance

The Emergency and Towing Favorite numbers can only
be altered. These cannot be deleted and the names cannot
be changed.

To change the Emergency or Towing number follow these
steps.

•

Touch the phonebook soft-key from the Phone main
screen.

•

Touch the Favorites soft-key. Next scroll to the bottom
of the list to locate the Emergency and Towing Favor-
ites.

•

Touch the + Options soft-key.

•

Touch the + next to appropriate Favorite that is to be
altered.

•

The Options pop will appear and you can choose
between Editing the number or resetting the number
to default.

Phone Call Features

The following features can be accessed through the
Uconnect™ Phone if the feature(s) are available and
supported by Bluetooth

威

on your mobile service plan.

140

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Journey 2011
















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Journey 2011

Reviews:

Related manuals for Journey 2011

Brands by name

Popular brands

Dodge Journey 2011, Owner'S Manual

Search results

Summary of Contents for Journey 2011

Reviews:

Related manuals for Journey 2011

Brands by name

Popular brands