Dodge Journey 2011 Owner'S Manual Download Page 138

Page: 138 / 559

•

“Show Paired Audio Devices”

Connecting To A Particular Mobile Phone Or
Device

Uconnect™ Phone will automatically connect to the
highest priority paired phone and Bluetooth

威

audio

device within range. If you would need to choose a
particular phone or device follow the steps:

•

Touch the Phone soft-key.

•

Touch the Settings soft-key.

•

Touch to select the particular phone or device.

•

Touch the X to exit out of the Settings screen.

Disconnecting A Device

•

Touch the Phone soft-key.

•

Touch the Settings soft-key.

•

Touch the + Options soft-key, then touch the + next to
the appropriate device to be disconnected.

•

The options pop-up will be displayed.

•

Touch the Disconnect Device soft-key.

•

Touch the X to exit out of the Settings screen.

Deleting A Device

•

Touch the Phone soft-key.

•

Touch the Settings soft-key.

•

Touch the + Options soft-key, then touch the + next to
the appropriate device to be disconnected.

•

The options pop-up will be displayed.

•

Touch the Delete Device soft-key.

•

Touch the X to exit out of the Settings screen.

136

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Journey 2011
















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Journey 2011

Reviews:

Related manuals for Journey 2011

Brands by name

Popular brands

Dodge Journey 2011, Owner'S Manual

Search results

Summary of Contents for Journey 2011

Reviews:

Related manuals for Journey 2011

Brands by name

Popular brands