Dodge Journey 2011 Owner'S Manual Download Page 488

Page: 488 / 559

The most common causes are:

•

Road salt, dirt, and moisture accumulation.

•

Stone and gravel impact.

•

Insects, tree sap, and tar.

•

Salt in the air near seacoast localities.

•

Atmospheric fallout/industrial pollutants.

Washing

•

Wash your vehicle regularly. Always wash your ve-
hicle in the shade using MOPAR

威

Car Wash or a mild

car wash soap, and rinse the panels completely with
clear water.

•

If insects, tar, or other similar deposits have accumu-
lated on your vehicle, use MOPAR

威

Super Kleen Bug

and Tar Remover or equivalent to remove.

•

Use a high quality cleaner wax, such as MOPAR

威

Cleaner Wax to remove road film, stains and to protect
your paint finish. Take care never to scratch the paint.

•

Avoid using abrasive compounds and power buffing
that may diminish the gloss or thin out the paint
finish.

CAUTION!

•

Do not use abrasive or strong cleaning materials
such as steel wool or scouring powder that will
scratch metal and painted surfaces.

•

Use of power washers exceeding 1,200 psi
(8 274 kPa) can result in damage or removal of
paint and decals.

486

MAINTAINING YOUR VEHICLE

Summary of Contents for Journey 2011
















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Journey 2011

Reviews:

Related manuals for Journey 2011

Brands by name

Popular brands

Dodge Journey 2011, Owner'S Manual

Search results

Summary of Contents for Journey 2011

Reviews:

Related manuals for Journey 2011

Brands by name

Popular brands