Dodge Journey 2011 Owner'S Manual Download Page 156

Page: 156 / 559

•

If multiple numbers are available for the contact select
which number you would like to have the message
sent.

•

Press “Send” or “Cancel”.

Send Messages Using Voice Commands:

•

Press the

button.

•

After the “Listening” prompt and the following beep,
say “Send message to John Smith mobile”.

•

After the system prompts you for what message you
want to send, say the message you wish to send or say
“List”. There are 18 preset messages.

While the list of defined messages are being read, you can
interrupt the system by pressing the

button and

saying the message you want to send.

After the system confirms that you want to send your
message to John Smith, your message will be sent.

List of Preset Messages:

1. Yes.

2. No.

3. Okay.

4. I can’t talk right now.

154

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Journey 2011
















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Journey 2011

Reviews:

Related manuals for Journey 2011

Brands by name

Popular brands

Dodge Journey 2011, Owner'S Manual

Search results

Summary of Contents for Journey 2011

Reviews:

Related manuals for Journey 2011

Brands by name

Popular brands