manualshive.com logo in svg

Dodge Journey 2011, Owner'S Manual

The Dodge Journey 2011 Owner's Manual is a comprehensive guide for owners, providing important information on operating and maintaining this versatile crossover. Download the manual for free from our website to access detailed instructions, troubleshooting tips, and other valuable insights to enhance your ownership experience.

Share
Download
background image

•

operation from the driver’s seat.

•

Performance, such as audio clarity, echo, and loudness
to a large degree rely on the phone and network, and
not the Uconnect™ Phone.

•

Echo at the far end can sometimes be reduced by
lowering the in-vehicle audio volume.

•

In a convertible vehicle, system performance may be
compromised with the convertible top down.

SMS

Uconnect™ Phone can read or send new messages on
your phone.

Your phone must support SMS over Bluetooth

威

in order

to use this feature. If the Uconnect™ Phone determines
your phone is not compatible with SMS messaging over
Bluetooth

威

the “Messaging” button will be greyed out

and the feature will not be available for use.

NOTE:

Uconnect™ Phone SMS is only available when

the vehicle is not in moving.

Read Messages:

If you receive a new text message while your phone is
connected to Uconnect™ Phone, an announcement will
be made to notify you that you have a new text message.

152

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Journey 2011
















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Journey 2011

Jeep Compass Overview Manual preview
Compass
Brand: Jeep Pages: 25
RAM Commercial PROMASTER 2020 Quick Reference Manual preview
PROMASTER 2020
Brand: RAM Commercial Pages: 12
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
FORM FIT SD 13R07-5 Installation Instructions preview
SD 13R07-5
Brand: FORM FIT Pages: 2
Thule Edge Flush Rail Instructions Manual preview
Edge Flush Rail
Brand: Thule Pages: 12
Hama 00201510 Operating Instructions Manual preview
00201510
Brand: Hama Pages: 40
BMW E39/2 Installation Instructions Manual preview
E39/2
Brand: BMW Pages: 21
AL-KO AKS 1300 Operating Instructions Manual preview
AKS 1300
Brand: AL-KO Pages: 40
Thule 953000 Instructions Manual preview
953000
Brand: Thule Pages: 8
Kargo Master 48132 Instruction Manual preview
48132
Brand: Kargo Master Pages: 9
Mazda 2014 CX-9 User Manual preview
2014 CX-9
Brand: Mazda Pages: 604
INNO TR163 Installation Instructions preview
TR163
Brand: INNO Pages: 3
Whispbar K519W Fitting Instructions Manual preview
K519W
Brand: Whispbar Pages: 15
Camcar 40072 Mounting Instructions preview
40072
Brand: Camcar Pages: 2
Jotto Desk Force 475-0750 Installation Instructions preview
Force 475-0750
Brand: Jotto Desk Pages: 3
Honda 2012 CIVIC SEDAN HF Technology Reference Manual preview
2012 CIVIC SEDAN HF
Brand: Honda Pages: 8
Honda 2013 Odyssey Touring Technology Reference Manual preview
2013 Odyssey Touring
Brand: Honda Pages: 21
Cequent Performance Products 76025 Installation Instructions Manual preview
76025
Brand: Cequent Performance Products Pages: 18

Brands by name

Popular brands

Load more brands