![Docomo SO-02D Instruction Manual Download Page 29](http://html1.mh-extra.com/html/docomo/so-02d/so-02d_instruction-manual_2515087029.webp)
27
Before Using the Terminal
Do not charge the battery pack for a
long time (several days)
・
If you remain charging the terminal for a long
time, the power supply starts from the
internal battery after completion of charging.
The usage time duration may be short. In that
case, please charge it again correctly. For
recharging, remove the terminal from the AC
Adapter cable and reconnect it again.
1
Open the microUSB connection
jack cover and insert the microUSB
cable horizontally with the
microUSB plug
engraved side
facing up into the microUSB
connection jack of the terminal.
2
Insert the microUSB cable
horizontally with the USB plug
engraved side facing up into the
USB connection jack of the
included AC Adapter, and insert
the AC Adapter plug to the power
outlet.
3
When the charging is completed,
remove the microUSB plug of the
microUSB cable from the terminal.
4
Remove the AC Adapter from the
power outlet.
❖
Note
・
If the microUSB cable is connected into the USB
connection jack for charging etc., the terminal is
automatically powered on although the operations
are not available. Be careful not to connect the
microUSB cable in a place where the use is
prohibited such as in airplane or hospital.
1
Open the microUSB connection
jack cover and insert the microUSB
cable horizontally with the
microUSB plug
engraved side
facing up into the microUSB
connection jack of the terminal.
2
Insert the USB plug of the
microUSB cable horizontally into
the USB port of a PC.
・
When "PC Companion software" screen
appears on the terminal, tap [Skip].
・
When a screen for new hardware
detection etc. appears on the PC, select
[Cancel].
3
When the charging is completed,
remove the microUSB plug of the
microUSB cable from the terminal.
Charging with AC adapter
Charging with a PC