205
International roaming
･
You can confirm the name of the connected
network operator on the Notification panel.
Date & time settings
When "Date & time" is set to "Automatic", the
date, time and time differences of the
terminal clock are corrected by receiving the
information related to time and time
differences from the network of overseas
network operator you connect to.
･
Correction of the time/time differences may
not be performed correctly depending on the
network of overseas network operator. In that
case, set time zone manually.
･
Timing of correction varies by the overseas
network operator.
･
Date & time (P.127)
About inquiries
･
For loss or theft of the terminal or docomo
mini UIM card, immediately contact
DOCOMO from the spot to take the necessary
steps for suspending the use. For inquiries, see
the last page of this manual. Note that you are
still liable for the call and communication
charge incurred after the loss or theft
occurred.
･
For using from land-line phone, entering
"International call access code" or "Universal
number international prefix" for the country is
needed.
After returning to Japan
When you return to Japan, the terminal is
connected to DOCOMO network
automatically. If connection is failed, perform
the following operations.
･
Set "Network Mode" to "WCDMA (preferred)/
GSM". (P.206)
･
Set "Search mode" to "Select automatically" in
"Service providers" settings. (P.206)
When you start the international roaming or
move out of your operator's network, you
need to reconnect the terminal to another
available network.
❖
Information
･
Some applications automatically perform packet
communications. To disconnect packet
communication manually, from the Home screen,
tap
t
and tap [Settings]
u
[Wireless &
networks]
u
[Mobile networks]
u
[Data enabled] to
unmark.
Making setting for
international use
