Contents/Precautions
7
Material list
Handset
Back Cover SH74
Battery Pack SH43
Desktop Holder SH48
General notes
z
SH-06G is waterproof, however, do not allow water to get
inside the handset and do not allow accessories or optional
parts to get wet.
The battery pack, adapter, desktop holder and docomo nano UIM
card are not waterproof. Do not use in humid or steamy areas
such as bathrooms and avoid exposing to rain and other forms of
moisture. If they are carried close to the skin, perspiration may
cause internal components to corrode and result in malfunction.
Note that if a problem is found to be due to moisture, the handset
and parts are not covered by warranty and in some cases may be
irreparable. Even when repairs are possible, repair charges will
be incurred, since the damage is not covered by warranty.
z
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
･
Forceful rubbing of the display with a dry cloth etc. may scratch
its surface.
･
Water drops, dirt, etc. left on the display may cause stains to
form on its surface.
･
Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
z
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power
or insufficient battery charge. Keep the terminals clean with a dry
cotton swab etc.
Be careful with the terminals while cleaning them.
Part
Material/Surface treatment
Surface of the
handset
Main display
side
PC, PMMA resin/Hard coating
Sub display
side
PC, PMMA resin/Hard coating
Side surface of
main display
side
Polyamide resin with glass/UV
coating
Side surface of
sub display
side
Aluminum/Anodizing
Keyboard side UV cured resin
Side surface of
keyboard side
Polyamide resin with glass/UV
coating
Back of
keyboard side
PC+ABS-GF20 resin/UV coating
Hinge
Polyamide resin with glass/UV
coating
Side surface of
hinge section
ABS resin/UV coating
Camera panel
PC, PMMA resin/Hard coating
Operation key (including
ornament)
UV cured resin
Side Key
PC resin/UV coating
Quick open button
PC resin
Aluminum/Anodizing
Charging terminal
SUS/au plating
External connector terminal
Copper alloy/Gold plating
Infrared port
ABS resin/Hard coating
microSD Card
slot
Metal part
STAINLESS
Resin section
LCP
docomo nano UIM card tray
POM
Battery storage
side
Sticker
PET
Resin section
PC+ABS-GF20 resin
Metal part
Nickel silver
Battery storage
section
Surrounding
area of battery
storage section
PC+ABS-GF20 resin
Screw
SUS/Passivation coating
Battery terminal
Battery terminal
connector
PA4T
Battery terminal Copper alloy/Gold plating
Fitting cover
UV cured resin
Part
Material/Surface treatment
Back cover
PC+ABS-GF20 resin/UV coating
Gasket
EPDM/Low friction coating
Part
Material/Surface treatment
Battery pack
PC resin
Terminal section
Copper alloy/Gold plating
Water wet determination seal
High quality paper/PET
Label
PET/mat varnish paper
Part
Material/Surface treatment
Desktop holder (top case/bottom
case)
ABS resin/Grain finish
Terminal lever
POM resin
Lock lever
POM resin
Charging terminal
Phosphor bronze/Gold plating
Metal section of connecting
terminal
SUS
Screw
Carbon steel for cold heading/
Trivalent black chromate
Rubber base
Foamed urethane
Production lot label
Polyester film
Handling precautions
