Camera
39
■
Save to
: Set a save destination.
■
Time Lapse
: Set shooting interval.
Hold the camera over bar codes (JAN code, QR codes) to scan
the information.
JAN code
z
JAN code is a bar code expressing a number with the vertical lines
of different width.
z
The camera can scan JAN8 and JAN13 codes.
QR code
z
QR code is a 2-dimensional code expressing data in vertical and
horizontal directions.
1
In the standby screen,
z
/
[Camera]
/
[Barcode
Reader]
z
To adjust the brightness:
u
2
Display a bar code to scan on the main display
z
Display the bar code in the center of the main display.
z
Keep a distance of approximately 10 cm between a bar code
and the camera with their position stabilized as much as
possible to recognize easily.
z
When scanning is complete, completion sound is heard and
the scan result screen is displayed.
z
To cancel scanning temporarily, press
C
. To resume
scanning, press
t
.
z
Setting Barcode Reader:
z
/
set each item
For divided data
z
Some QR codes require of multiple divided data scanning (up
to 16 codes) to merge them into one. Repeat the operation
until all data is scanned. The scan result is displayed.
3
Use the scan result
z
When a phone number, URL, or mail address is scanned,
select the scan result to use.
z
To register the scan result:
z
/
[Entry data]
z
To copy the scan result:
z
/
[Copy All]
You can have English texts translated into Japanese in real
time just by holding the camera over English texts.
z
Translation finder can be used in the vertical display.
1
In the standby screen,
z
/
[Camera]
/
[Translation finder]
2
Display English texts to translate on the main
display
/
t
z
Make sure that the entire English texts to translate are
displayed on the screen. Translated Japanese text is
displayed.
z
The shutter sounds and the untranslated and translated still
pictures are automatically saved.
z
To make settings for Translation finder:
z
/
[Detail
Settings]
/
set each item
3
Use the shot still picture
z
To display/hide translated texts:
C
z
To zoom in/out:
i
/
m
z
To copy the characters: Display the translated Japanese texts
or untranslated English texts
/
z
/
[Copy text]
z
To send the characters: Display the translated Japanese texts
or untranslated English texts
/
z
/
[Send text]
/
select a
sending method/
/
follow the instructions on the screen and
operate
z
Some functions may not be set at the same time.
Barcode Reader
z
Scanning may fail depending on bard code type or size.
z
Scanning may fail when multiple bar codes are displayed on the
main display.
z
Scanning may fail depending on condition such as scratch, dirt,
damage, print quality, light reflection, or QR code version.
10 cm or more
Translation finder
z
You can only have English texts translated into Japanese.
z
Texts may not be scanned or translated correctly depending on
the English font, background, text color, text size, layout, etc.
z
You can only copy or send texts which are translated into
Japanese.
z
You may be able to have texts translated correctly by adjusting
angles of the screen to get the texts laid out horizontally.
