Handset Settings
50
Restrict calls
You can set not to make calls.
1
In the standby screen,
z
/
[Settings]
/
[Lock/
security]
/
[Restrict calls]
2
Enter the security key
/
[Restrict calls]
Secrecy settings
You can set contacts in the phonebook not to be displayed in
the phonebook by setting the secrecy setting for the contacts.
z
Usually, the handset is in secret mode.
z
When you temporarily disable the secret mode, both normal
contacts and contacts for which the secrecy setting is set are
displayed.
z
If the main display is turned off while the secret mode is
temporarily disabled, the secret mode is enabled.
1
In the standby screen,
z
/
[Settings]
/
[Lock/
security]
/
[Secrecy settings]
2
Enter the passcode
z
The secret mode is temporarily disabled.
3
[OK]
4
Select an item
■
Set contact secrecy
: Set the secrecy setting for contacts in the
phonebook.
■
Disable secret mode temporarily
: Change the security key for
temporary cancellation of the secret mode.
■
Guide
: Display how to temporarily disable the secret mode
and explanation for contacts in the phonebook for which the
secrecy setting is set.
Security codes used on the handset
Some functions for convenient use of the handset require
security codes. In addition to security code used for various
handset operations, use security codes such as the network
security code when using network services. Use security
codes properly according to the purposes to fully utilize the
handset.
z
Entered security code for various functions and PIN code turn into
[
・
].
Precautions about various security codes
z
Do not use easily predictable numbers for security codes to be set
such as "birthday", "part of a phone number", "address or room
number", "1111" or "1234". Keep a separate memo of security
codes.
z
Keep security codes private. If the security codes are found and
improperly used by others, DOCOMO shall not be liable for any
damages incurred on the users.
z
If you forget your security codes, you are required to bring your
identification (a driver’s license etc.), your handset and your
docomo nano UIM card to a docomo Shop.
For details, contact the number listed in "General Inquiries" on the
last page.
z
PUK (PIN Unlock Key) is described in the agreement form
(customer copy) you received at the time of subscription at a
docomo Shop. If you made a subscription at a shop other than a
docomo Shop, bring your identification (a driver’s license etc.) and
your docomo nano UIM card to a docomo Shop or contact the
number listed in "General Inquiries" on the last page.
■
Security key (security code for various functions)
If you set any restrictions, you need to enter the security key to
temporarily disable them. [Passcode] ([0000]) is set as a security
key by default but you can change it (
n
P.51 "Security key setting").
z
If you enter wrong security keys five times continuously, you
cannot enter it for 30 seconds.
■
Network security code
Network security code is a four-digit code required for confirming the
subscriber’s identity when an order is received at a docomo Shop,
docomo Information Center or "
お客様サポート
" (Support), used for
accessing various network services, etc. You can set any code at
the time of subscription but you can change the code.
z
For details on network security code, refer to the DOCOMO
website.
[Restrict calls]
z
You can call to the emergency number (110, 119 or 118) even
when you set Restrict calls. Receiving all incoming calls are
allowed for approximately 5 minutes after an emergency call is
made. If you turn off the handset before approximately 5
minutes have passed, calls are restricted again.
z
If you registered many contacts in the phonebook, setting
Restrict calls and displaying the confirmation screen for the
available contacts may take time.
z
When contacts are added or changed in the phonebook after
Parental mode is set, make sure to update contacts information
in Parental mode.
z
If you have set Restrict calls, you need to enter the security key
to temporarily disable the restriction.
z
You can call to the emergency number (110, 119 or 118) even
when you set Restrict calls.
Operations in the secret mode
z
In the following cases, the names registered in the phonebook
do not appear and only the phone numbers appear.
■
Call screen
■
Redial/Call history list screen
z
In the following cases, the names registered in the phonebook
do not appear and only the mail addresses or phone numbers
appear.
■
Recipient/sender of docomo mail
■
Recipient/sender of SMS
Backing up/Data transferring
z
In the following cases, all contacts can be backed up/data-
transfered including contacts for which the secrecy setting is set
when secret mode is temporarily disabled.
■
Backup via SD card backup
*
■
All contacts are sent from the phonebook
■
Contacts are sent via infrared communication
* Available in the secret mode.
z
Secrecy setting is not taken over to the backed-up/data-
transfered contacts.
z
In the secret mode, contacts with secrecy setting set are not
synchronized to the phonebook cloud. To synchronize contacts
with secrecy setting set with the phonebook cloud, stop
synchronizing with the cloud in the phonebook. And then start
the use of cloud in the phonebook, and select [Use device data]
to synchronize.
