Dinamica Generale DG8000 Operator'S Manual Download Page 99

Page: 99 / 105

Service

INDICATOR DG8000 RevB0

PROCEDURE 4

Ref. NO / NO

Check the functioning of the SYSTEM and of the SENSORS

WITCH OFF THE MICROCOMPUTER

t) Just leave one sensor

connected to the scale.

u) Switch on the microcomputer.

v) Do the TARE (use the microcomputer’s manuals for instructions).

w) The scale has to be stable, displaying “0” Kg.

x) Check the correct functioning trying to load weight on the connected sensor (the displayed weight

is not important, but it must be steady).

REPEAT THE TEST CONNECTING EACH SENSOR, ONE AT A TIME, IN THE ORIGINAL CONNECTOR .

RESULT

CAUSE

ACTION

Zero and weight of a sensor

NON

stable.

The sensor is damaged

Contact the assistance service

Zero and weight of all the

sensors on the same connector

NOT

stable

The microcomputer is

damaged

Contact the assistance service

Zero and weight stable with all

the sensors in the same

connector

None

Repeat the test with another

scale connector.

Zero and weight stable with all

the sensors in all the

connectors

The system works correctly.

Connect everything and try again

in normal use

Summary of Contents for DG8000










































































































Search results

Summary of Contents for DG8000

Reviews:

Brands by name

Popular brands

Dinamica Generale DG8000, Operator'S Manual

Search results

Summary of Contents for DG8000

Reviews:

Brands by name

Popular brands