Accessories
INDICATOR DG8000 RevB0
88
OPTIONAL ACCESSORIES
The J1939 protocol available on the CAN BUS output is deeply described in a specific document,
not part of this manual. Please contact the Dinamica Generale Customer Service or R&D office for
more information.
Cable color
Signal
HI-TECH Connector
Blue
CAN H
D
Purple
CAN L
J
Black
GND
F
Without CAN BUS terminator.
You can enable this protocol through the password 689 but it is available only for some part
number. It offers the possibility to send the strings relating to the Recipe name, Components,
Unloading Programs and Unloading Points.
Below the parameters that you can manage:
- CANBus ADDRESS (0-255):
value relating to the protocol address that corresponds to the device connected.
- TRANSMISSION FREQUENCY / ENABLE (Disabled-100ms-200ms…1000ms):
value of transmission frequency.
- BROADCAST TYPE:
0 - All PGNs in order to send all the data
1 - Weight Status in order to send only the weight value
2 - Exec. Data in order to send the Components name, Recipe etc.
.
CAN BUS CABLE CONNECTIONS:
BLUE : CAN H
VIOLET : CAN L
BLACK : GROUND
Inside the indicator there isn’t the CAN BUS termination 120 ohm resistance.
CAN BUS Connector
Activation of communication protocol J1939
