Use
INDICATOR DG8000 RevB0
76
3
Press the
key or the ENTER
key to enter the chosen program.
4
On the second page
, press
to add the refused weight to the recipe.
5
At this point the DG8000 shows the
quantity of refused feed that is
actually stored in the internal
memory.
Press ENTER in order to add the
refused feed to this recipe. In this
case, DG8000 updates the new
quantity to load:
TOTAL LOAD = PROGRAMMED
TOTAL – REFUSED
Now, according to the new quantity
to load, DG8000 automatically
updates the new amount to load for
each component.
Press RESET in order to not use the refused
feed in this recipe.
If you decide to use the refused feed, DG8000 resets automatically the value of the Total
Refused stored in the internal memory.
