Configuration
INDICATOR DG8000 RevB0
50
INITIAL SETTING
It is advisable to turn on the power unit and wait 10/15 minutes before you start work in
order to eliminate interference on weight due to initial temperature jumps of electronic
components.
Before you start work with DG80000 it is advisable to set the following settings.
DISPLAY CONTRAST
1
If when you turn on
the display you do not see anything there may be a problem in the
setting of the contrast: So you should turn off the power unit and turn it on again keeping
both keys
↑
and
↓
pressed. The system will set a default contrast value.
2
If you want to adjust the contrast
manually, wait for the indicator to go
into TOTAL WEIGHT. On the
second page open the menu
and select the key
.
3
Set the desired value by pressing the
↑
or
↓
keys
4
Press ENTER to confirm setting
5
If you want to quit without saving the setting press the RESET key.
