Configuration
INDICATOR DG8000 RevB0
30
AUTOMATIC SKIP OF THE COMPONENTS
Parameters Involved
Position
Auto Next Mode
DG8000 Base Parameters
Auto Next Threshold Weight
DG8000 Base Parameters
Max. Prealarm Time
DG8000 Base Parameters
Auto Next Threshold %
DG8000 Base Parameters
Alarm Threshold %
DG8000 Base Parameters
Alarm Delay
DG8000 Base Parameters
Stabilization Time
DG8000 Base Parameters
Tolerance (Weight)
DTM – Editing Component
The base parameter Auto Next Mode allows you to set a particular loading mode of a
Component such that you can activate a timer after which the DG8000 will automatically
switch to the next Component, even if you have not reached the Target Weight of the
Component.
This is useful in particular for the automated systems (stationary mixer), if a problem
occurs such as the Target Weight is not reached or if the value of the Tolerance (Weight)
(if set on the DTM) is overestimated.
The possible options are:
None, Weight, Percent
Auto Next Mode = None
If set to None, it will automatically switch to the next Component in standard mode.
Therefore, depending on how the base parameters (Alarm Threshold%, Alarm Delay and
Stabilization Time) are set. When you load a weight equal to:
Target – [(Alarm Threshold%) * Target / 100)]
It activates the siren intermittently; once the target is reached the siren sounds for a fixed
time equal to Alarm Delay, then shown on the display is a countdown equal to Stabilization
Time (if the Stabilization Time is set) after which the DG8000 automatically switches to
the next Component.
Auto Next Mode = Weight
To work with this mode you must appropriately set the parameters Auto Next Threshold
Weight, Auto Next Timer and possibly the field Tolerance (Weight) on the DTM. The base
parameter (Alarm Threshold%) is ignored, while Alarm Delay and Stabilization Time are
managed. Using this mode when you load a weight equal to
Target – Weight
It activates the siren intermittently and starts a countdown equal to Auto Next Timer after
which, even if you have not reached the Target Weight (and also after an acoustic alarm
fixed to (Alarm Delay ) and eventually to a Stabilization Time (if the Stabilization Time is
set) ) the DG8000 automatically switches to the next Component.
The value is equal to the Tolerance (Weight) of the Component (if set on the DTM),
otherwise to the value set into the Auto Next Threshold Weight set on the DG8000 and
equal for all the Components.
1
Not available on all the DTM version
