Use
INDICATOR DG8000 RevB0
68
EXECUTION OF THE UNLOADING PROGRAM
1
Press the
key to enter in the
unloading program execution mode. At
this point there are two options.
Original DTM
: decide to execute the
program as programmed originally by the
DTM software or;
Last Scale modified:
decide to execute the
program with the last modification made on
this program;
2
Select the unloading program you want
to execute using the
↑ ↓
and
→ ←
keys (on the display you will only see
active programs).
3
Press the
key or ENTER to
enter the chosen program.
4
Check that the data on the display is correct the name of program and the start time
cannot be modify in this section).
Shown below the functions of the display keys.
