Configuration
INDICATOR DG8000 RevB0
33
E
N
GL
IS
H
STRING SETUP
Access through the key number 5 of the Setup menu. In this section it is possible to
change the components and unloading points in the same way described in the section
Use of microcomputer
programming from the indicator
Components and Unloading
points.
It is also possible change the header of the printer by pressing the number 3.
Programming the printer registration
1
Select the line to be programmed with the
↑
or
↓
keys (using the
→
or
←
keys you
can move from one page to the other one at a time).
2
Press
to enter the programming mode
3
Use the
↑
or
↓
,
→
or
←
and the word process keys to program the datum to be
included.
4
Confirm the programming by pressing ENTER
5
By pressing this key
is possible to recall all data, which were default
programmed by the manufacturer.
6
Once all the desired data have been programmed, go back to the main configuration
menu by pressing RESET.
