Use
INDICATOR DG8000 RevB0
56
Press the button
to associate
an Unloading Program with the Recipe
selected. In this way, the Unloading
Program is run automatically at the end
of the completion of the Recipe.
Scroll through the Unloading Programs
using the keys
↓ and ↑
and select the
desired one with the ENTER key.
The top right screen shows the name of
the Unloading Program associated. If
there is no Unloading Program
associated, no data will be displayed.
Press the button
to cancel the
association of the Unloading Program
with the Recipe. When you are
prompted "Cancel Association?", press
ENTER to confirm or RESET to go
back.
The association of the Unloading Program with the Recipe is only possible if the Basic
parameter "DT ENABLED" is set to "NO". If the parameter is set to "YES", the function
is not available because it is associated with the software component.
2
View and edit the detail of a selected
recipe by pressing on
again.
The
key permits to edit the
name of a recipe. Refer to the section
How to use the edit text function
for
the details of editing.
