Rules
INDICATOR DG8000 RevB0
E
N
GL
IS
H
99
WARNING
The power cable has to be connected directly to the battery or to a regulated
power source.
If this is not the case DG does not respond to any eventual damage to the
microcomputer.
Disconnect the power cable from the microcomputer when the battery of the
machine is being charged.
If this is not the case DG does not respond to any eventual damage to the
microcomputer.
Disconnect all the cables from the microcomputer before performing welding
operations on the machine.
If this is not the case DG does not respond to any eventual damage to the
microcomputer.
In order to have a correct functioning, check that the battery always has a
tension level above 10,5 Volt.
Before clearing the mixer with a high pressure washer protect the device from
possible water seepage. Furthermore be very careful to not expose the sensors,
junction box, acoustic alarm, cables and other eventual optional accessories to
direct water jets.
If the equipment needs to be cleaned, use a soft, damp, lint-free cloth. Never
use sprays, solvents, abrasives, or sharp or pointed objects that could damage
the indicator.
ENVIRONMENT: Disposal Rules
This marking on the product or on its packaging means that
this product can not be disposed with normal household
waste. You are responsible for disposal of this equipement in
a correct way and in according to local regulations.
Electronic equipement, which has become useless, must be
collected separately and sent an eco-rense.
It is forbidden to abandon in the environment device
components or spare parts.
The manufacturer declines any responsibility for possible
damage to environment, resulting from non-compliance with
the existing legislation regarding disposal / recovery.
!
!
!
!
!
!
!
